|
FEATURES
- PSTN
- LL 2 wires: Point to Point and Multipoint
- V21 to V34+ (300 to 33600 bps)
Full Duplex: V21, V22, V22 Bis,
V23 Turnaround, V32, V34, V34+
Half Duplex: V23, V17, V27 Ter, V29
- Error correction MNP4
- Asynchronous transmission RS232 / RS485
- Auto-adaptation from 300 to 115200 bits/s
- 4 inputs - 2 opto-coupled outputs (alarm or status transfer)
- Dialling at power-up or by DTR activation
- MODBUS (Master / Slave)
- Secure connexion by password and/or call back
- Audio and visual communication status
- Watchdog
- Power supply supervisor
CONFIGURATION
- HAYES (AT commands) / V25 Bis C.C.I.T.T. / MODBUS (Master / Slave)
- By software (local or remote by PSTN)
- By micro-switch
- Saved in EEPROM
INTERFACES
- RS232: female 9-pin Sub-D
- RJ11: PSTN or LL 2 wires
- LED: PWR / TX / RX / DCD
- Screw connectors: Power supply, RS485, inputs / outputs
- Power supply: 5 Vdc or from 7.5 Vdc to 48 Vdc
AVERAGE POWER CONSUMPTION
- 116 mA max @ 12 Vdc in communication
- 215 mA max @ 5 Vdc in communication
- Less than 1 µA @ 7.5 to 48 Vdc in idle mode
ENVIRONMENTAL & MECHANICAL
- Operating temperature: -15°C to +60°C
- Storage temperature: -25°C to +70°C
- Rail-DIN Case: Height 118 mm x Length 137.5 mm x Width 45 mm
- Weight: 230 g
APPROVALS
- Certification CE
OPTIONS
- Audio input: S0188
- Extension card: S0207 version A
(8 inputs / 8 outputs / 4 analogue inputs 4-20 mA)
- Backup battery: S0155
ACCESSORIES
- Cable RS232 Sub-D 9 M / F: 4404000210
- Cable RS485 for Schneider automat TER connector (consult us)
- Power supply Rail DIN 230 Vac / 12 Vdc - 3,5 A: 0476414500
- Power supply block 230 Vac / 12 Vdc - 1 A: 0471210700 | 
